Research Article | | Peer-Reviewed

Research on Calculation Method of Bottom Isolation Shear Wall Structure Considering Fuzzy Analytic Hierarchy Rrocess

Received: 27 December 2023     Accepted: 9 January 2024     Published: 18 January 2024
Views:       Downloads:
Abstract

In our country, buildings are facing the severe threat of earthquake disaster, almost all buildings have to carry out structural seismic design. Shear wall structure is one of the common structural systems of high-rise building, in order to study the isolation effect of high aspect ratio structure and understand the reason of isolation effect, under the action of horizontal force, Timushenko beam can assume the deformation mode of bending-shear type, which is close to the deformation characteristics of shear wall structure. The bottom isolation shear wall structure has the characteristics of bending-shear lateral displacement curve under the action of strong earthquake, and its mechanical characteristics are similar to Timoshenko beams. How to accurately evaluate the importance and reliability of many influencing factors, this paper adopts the fuzzy analytic hierarchy process to analyze the dynamic characteristics before and after the seismic isolation of the cantilever Timoshenko beam of the bending-shear structure, determine the weight of each evaluation item for the analysis of the damping effect of the whole structure. It is concluded that prolonging the period, reducing the participation mass coefficient of high-order mode shapes and increasing the damping ratio of the system are the three major factors for vibration isolation technology.

Published in Science Discovery (Volume 12, Issue 1)
DOI 10.11648/j.sd.20241201.11
Page(s) 1-7
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Bottom Isolation, Bending-Shear Type, Fuzzy Analytic Hierarchy Process, Timoshenko Beams, Isolation Technology

References
[1] 李帅, 唐洁芳, 王鹏飞. 基于AHP法的武汉市应急医疗设施选址评价研究[J]. 西南大学学报(自然科学版), 2022. 44(05): 209-221.
[2] 陈大川, 王孜, 郭健. 基于模糊层次分析法的建筑物整体平移施工风险评估[J]. 沈阳建筑大学学报(自然科学版), 2020. 36(01): 57-65.
[3] 张晋芳, 余隆丽, 周郅炅, 等. 基于层次分析法的超高层建筑结构选型 [J]. 建筑结构, 2021. 51(S1): 358-362.
[4] 周福霖. 工程结构减震控制 [M]. 北京: 中国地震出版社, 1997.04.
[5] GB50011-2010 建筑抗震设计规范 [S]. 北京: 中国建筑工业出版社, 2010.
[6] 崔鸿超. 日本超高层建筑结构抗震新技术的发展现状及思考 [J]. 建筑结构. 2013, 43(16): 1-7.
[7] 李洪求, 薛彦涛, 郗可, 巫振弘, 戴云景,汤荣伟. 某高烈度区高层剪力墙住宅隔震设计 [J]. 建筑结构, 2019, 49(16): 1-5.
[8] 罗强军, 高国家, 管庆松, 张玉敏. 昆明天湖景秀百米高住宅结构隔震非线性分析 [J]. 建筑结构, 2017, 47(08): 93-97.
[9] 刘文光,杨巧荣,周福霖. 大高宽比隔震结构地震反应的实用分析方法 [J]. 地震工程与工程振动. 2004, 24(4): 115-121.
[10] 赖正聪, 潘文, 白羽等.基于等效梁模型的大高宽比高层剪力墙隔震结构地震反应分析 [J]. 振动与冲击, 2021, 40(20): 127-134.
[11] 叶昆,徐誉铭,倪管乐等.基础隔震结构直接基于位移设计的一体化抗震设计方法 [J]. 建筑结构学报, 2022, 43(04): 58-67.
[12] 赖正聪, 白羽, 潘文, 叶燎原, 杨晓东, 安晓文, 苏何先. 高烈度地区高层隔震剪力墙结构抗震性能地震模拟振动台试验 [J]. 建筑结构, 2016, 46(11): 72-76+95.
[13] 王焕定,付伟庆,刘文光, 等. 规则隔震结构等效简化模型的研究[J]. 工程力学, 2006, 23(8): 138-143.
[14] Anil K. Chopra. 结构动力学理论及其在地震工程中的应用(第2 版) [M]. 北京: 高等教育出版社, 2007.
[15] 郑展杰.基于深度学习的强震动分量相关性研究及在地震动选取中的应用 [D]. 中国地震局地球物理研究所, 2023.
Cite This Article
  • APA Style

    Yulou, L., Yulin, J., Lu, C., Zhaohong, Y. (2024). Research on Calculation Method of Bottom Isolation Shear Wall Structure Considering Fuzzy Analytic Hierarchy Rrocess. Science Discovery, 12(1), 1-7. https://doi.org/10.11648/j.sd.20241201.11

    Copy | Download

    ACS Style

    Yulou, L.; Yulin, J.; Lu, C.; Zhaohong, Y. Research on Calculation Method of Bottom Isolation Shear Wall Structure Considering Fuzzy Analytic Hierarchy Rrocess. Sci. Discov. 2024, 12(1), 1-7. doi: 10.11648/j.sd.20241201.11

    Copy | Download

    AMA Style

    Yulou L, Yulin J, Lu C, Zhaohong Y. Research on Calculation Method of Bottom Isolation Shear Wall Structure Considering Fuzzy Analytic Hierarchy Rrocess. Sci Discov. 2024;12(1):1-7. doi: 10.11648/j.sd.20241201.11

    Copy | Download

  • @article{10.11648/j.sd.20241201.11,
      author = {Li Yulou and Jie Yulin and Chen Lu and Yu Zhaohong},
      title = {Research on Calculation Method of Bottom Isolation Shear Wall Structure Considering Fuzzy Analytic Hierarchy Rrocess},
      journal = {Science Discovery},
      volume = {12},
      number = {1},
      pages = {1-7},
      doi = {10.11648/j.sd.20241201.11},
      url = {https://doi.org/10.11648/j.sd.20241201.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20241201.11},
      abstract = {In our country, buildings are facing the severe threat of earthquake disaster, almost all buildings have to carry out structural seismic design. Shear wall structure is one of the common structural systems of high-rise building, in order to study the isolation effect of high aspect ratio structure and understand the reason of isolation effect, under the action of horizontal force, Timushenko beam can assume the deformation mode of bending-shear type, which is close to the deformation characteristics of shear wall structure. The bottom isolation shear wall structure has the characteristics of bending-shear lateral displacement curve under the action of strong earthquake, and its mechanical characteristics are similar to Timoshenko beams. How to accurately evaluate the importance and reliability of many influencing factors, this paper adopts the fuzzy analytic hierarchy process to analyze the dynamic characteristics before and after the seismic isolation of the cantilever Timoshenko beam of the bending-shear structure, determine the weight of each evaluation item for the analysis of the damping effect of the whole structure. It is concluded that prolonging the period, reducing the participation mass coefficient of high-order mode shapes and increasing the damping ratio of the system are the three major factors for vibration isolation technology.
    },
     year = {2024}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Research on Calculation Method of Bottom Isolation Shear Wall Structure Considering Fuzzy Analytic Hierarchy Rrocess
    AU  - Li Yulou
    AU  - Jie Yulin
    AU  - Chen Lu
    AU  - Yu Zhaohong
    Y1  - 2024/01/18
    PY  - 2024
    N1  - https://doi.org/10.11648/j.sd.20241201.11
    DO  - 10.11648/j.sd.20241201.11
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 1
    EP  - 7
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20241201.11
    AB  - In our country, buildings are facing the severe threat of earthquake disaster, almost all buildings have to carry out structural seismic design. Shear wall structure is one of the common structural systems of high-rise building, in order to study the isolation effect of high aspect ratio structure and understand the reason of isolation effect, under the action of horizontal force, Timushenko beam can assume the deformation mode of bending-shear type, which is close to the deformation characteristics of shear wall structure. The bottom isolation shear wall structure has the characteristics of bending-shear lateral displacement curve under the action of strong earthquake, and its mechanical characteristics are similar to Timoshenko beams. How to accurately evaluate the importance and reliability of many influencing factors, this paper adopts the fuzzy analytic hierarchy process to analyze the dynamic characteristics before and after the seismic isolation of the cantilever Timoshenko beam of the bending-shear structure, determine the weight of each evaluation item for the analysis of the damping effect of the whole structure. It is concluded that prolonging the period, reducing the participation mass coefficient of high-order mode shapes and increasing the damping ratio of the system are the three major factors for vibration isolation technology.
    
    VL  - 12
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Shenzhen Lianbo Construction Engineering Technology Co., Ltd. Shenzhen, China

  • Guangdong Lianbo New Infrastructure Co., Ltd. Guangzhou, China

  • Shenzhen Lianbo Construction Engineering Technology Co., Ltd. Shenzhen, China

  • Shenzhen Pengsheng Construction Co., Ltd. Shenzhen, China

  • Sections